BPMWC - FLAMAREST 1600B COMPONENT A
- MSDS: BPMWC
- Manufacturer: TEXTRON SPECIALTY MATERIALS
- Product Name: FLAMAREST 1600B COMPONENT A
- National Stock Number: 8030-01-132-5488
Product Identification
Product ID:FLAMAREST 1600B COMPONENT A
MSDS Date:04/10/1992
FSC:8030
NIIN:01-132-5488
Kit Part:Y
MSDS Number: BPMWC
Responsible Party
LOWELL, MA 01851
US
Emergency Phone: 508-452-8961
Preparer: PAUL DURKIN
Cage: 85590
Contractor
Cage: 85590
Ingredients
METHYLENE CHLORIDE (DICHLOROMETHANE) (SARA 313)
CAS: 75-09-2
RTECS: PA8050000
Fraction By Weight: 23%
OSHA PEL 500 PPM/1000 STEL
ACGIH TLV: 50 PPM/1000 STEL
EPA Report Quantity: 1000 LBS
DOT Report Quantity: 1000 LBS
Hazards
LD50 LC50 Mixture:ORAL LD50 (RAT) = 1500-2400 MG/KG.+
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:EYE/SKIN/MUCOUS MEMBRANE IRRIT. INHAL:
MAY CAUSE DIZZINESS OR SUFFOCATION. DEPRESSES CNS. EYE: DO NOT WEAR
CONTACT LENSES WHEN WORKING W/THIS MATL. CONTACT MAY IRRIT/BURN
EYES. SKIN: MAY CAUSE DEFATTI NG OF SKIN/REDNESS/ROUGHNESS/CUTTING
& PAIN. INGEST: POSS CHEMICAL PNEUMONIA. +INHAL LC10 = 50,000
PPM/5 MIN (MONKEY)
Explanation of Carcinogenicity:METHYLENE CHLORIDE IS CONSIDERED AN
ANIMAL CARCINOGEN, & ACGIH HAS CLASSIFIED IT AS A SUSPECTED HUMAN
CARCINOGEN.
Effects of Overexposure:DIZZINESS, CONFUSION, HEADACHES, IRRITATED EYES
(900-2000 PPM). AT 7000 PPM NUMBNESS AND TINGLING IN ARMS AND LEGS,
AND RAPID HEARTBEAT.
Medical Cond Aggravated by Exposure:PROLONG/REPEAT EXPOS-DERMATITIS.
MAY CAUSE INCREASE IN CARBOXYHEMOGLOBIN LEVELS. METHYLENE CHLORIDE
CAUSES "ADDITIVE" CARBON MONOXIDE TO SMOKERS. NOTE: METHYLENE
CHLORIDE IS CONSIDERED AN ANIMAL*
First Aid
First Aid:EYES: IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES. SEEK
MEDICAL ASSISTANCE. SKIN: WASH WITH SOAP AND WATER. APPLY SOOTHING
OINTMENT. INHALATION: REMOVE TO FRESH AIR.
*CARCIN OGEN, AND ACGIH HAS CLASSIFIED METHYLENE CHLORIDE AS A
SUSPECTED HUMAN CARCINOGEN.
Fire Fighting
Flash Point Method:TOC
Flash Point:137F,58C
Autoignition Temp:Autoignition Temp Text:*
Extinguishing Media:WATER, CO2
Unusual Fire/Explosion Hazard:NONE KNOWN. CLOSED CONTAINERS MAY RUPTURE
AND IGNITE IN FIRE CONDITIONS.
Accidental Release
Spill Release Procedures:ISOLATE AREA OF UNNECESSARY PERSONNEL. STAY
UPWIND. USE APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT, ABSORB SPILL
WITH CLAY ABSORBENT AND SCOOP INTO WASTE CONTAINER.
Handling
Handling and Storage Precautions:STORE IN COOL, DRY, VENTILATED AREA.
PREVENT WATER CONTAMINATION OF CONTAINERS. DO NOT USE ALUMINUM
EQUIPMENT FOR TRANSFER.
Other Precautions:WEAR SOLVENT RESISTANT BOOTS AND APRON WHERE
SPLASHING IS POSSIBLE.
Exposure Controls
Respiratory Protection:IF ENGINEERING CONTROLS AND WORK PRACTICES
CANNOT MAINTAIN PEL, USE HALF FACE OR FULL FACE RESPIRATOR WITH
ORGANIC VAPOR CARTRIDGE (BLACK) UP TO 1000 PPM. USE AIR LINE RESP
OR SELF-CONTAINED BREATHING APPARATUS ABOVE 1000 PPM.
Ventilation:LOCAL EXHAUST: AS REQUIRED TO MEET PEL. MECHANICAL:
RECOMMENDED.
Protective Gloves:VITON, SILVER SHIELDS OR PVA
Eye Protection:SFTY GLASSES W/SIDE SHLD, SPLASH GOGGLES
Other Protective Equipment:WEAR SOLVENT RESISTANT BOOTS AND APRON WHERE
SPLASHING IS POSSIBLE.
Work Hygienic Practices:AVOID SKIN CONTACT & BREATHING VAPORS. DO NOT
SMOKE IN WORK AREA. WASH HANDS PRIOR TO EATING, DRINKING OR USING
RESTROOM
Supplemental Safety and Health
KEY1:F5.
Chemical Properties
HCC:F5
Boiling Pt:B.P. Text:103F,39C
Vapor Pres:352MMHG@68
Vapor Density:2.9
Spec Gravity:1.33
Solubility in Water:1.32G/CC @ 77F
Appearance and Odor:OFF-WHITE LIQUID, METHYLENE CHLORIDE ODOR.
Stability
Stability Indicator/Materials to Avoid:YES
BASES, ESPECIALLY ALIPHATIC AMINES; STRONG OXIDIZERS. MASSES OF ONE
POUND OR MORE MIXED W/ALIPHATIC AMINES MAY CAUSE AN
Stability Condition to Avoid:CONTACT WITH OPEN FLAME, ELECTRIC ARCS OR
HOT SURFACES.
Hazardous Decomposition Products:CARBON OXIDES, HYDROGEN BROMIDE,
HYDROGEN CHLORIDE, PHOSGENE. IRREVERSIBLE
EXOTHERM.
Disposal
Waste Disposal Methods:DISPOSE AS HALOGENATED SOLVENT WASTE. MIXTURE
(F002 OR U080) IN STRICT ACCORDANCE WITH STATE AND FEDERAL
HAZARDOUS WASTE DISPOSAL REQUIREMENTS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.